
Friday, December 31, 2010
BMW Use Name I8 to Concept Ved
On the mat Frankfurt Motor Show 2009, the German manufacturer BMW AG is exhibiting the concept of efficient dynamics vision (Ved). Even in November and reportedly, claimed super eficien sedan because it has a very light weight with hybrid technology is already being produced. Only, the name and the vehicle has not been revealed. BMW he had registered the series "i" plus a number for his Megacity project. In fact, BMW Blog leak if BMW will use the i1, i2, i3, i9 and began to be applied to the production of 2013 and 2014, including Ved which will begin production late 2013. Well, to Ved, supposedly there is a possibility used I8. Why did not the i9 or 100?
That choice, the possibility of BMW wants to revive the memory "supercar M8" they are not so released. Incidentally, the design of the Ved was rather lead to a super car, especially with some chassis uses carbon fiber material and the weights were very light, which is characteristic of the supercar. Not only that, BMW saw Ved is a more efficient vehicle, but happy when driving because of high engine speed and horsepower from the engine hood is big enough. BMW did not want to compare Ved with M8 or Series 8 because of different technologies and era. However, BMW's own party have not given a signal about the name. Moreover, its production schedule is still three years from now. As a temporary label, sources said the BMW, it gives the name of BMW I8.MoreBMW Use Name I8 to Concept Ved

Moto Guzzi motorcycle new Griso 8V SE
Moto Guzzi motorcycle new Griso 8V SE. The price is USD 130.9 million and presented in two colors, green or Rosso Mandello Tenni combined with a black machine. It looks so macho leather upholstery combined with the wheels with wheels Pirelli Scorpion tires wrapped BER. The system relies on the rate freeze Brembo with radial P4/34 calipers, while cakram measuring 320 mm.
Moto Guzzi valor is increasingly felt that the engine "Quattrovalvole"which is the latest incarnation has a torque of 113Nm at 5800 rpm or greater than the previous version which only 108Nm at 6400 rpm. This increase comes after improvements made on the cam, fuel injection systems, and an enlarged cooling system. Interestingly, exhaust design model of two-into-one (two live together) and the edges are very large. Uniquely, the position of the merging of the two exhaust pipes located under the left leg.

Tuesday, December 21, 2010
Saturday, December 18, 2010
Nissan EV Versa Prototype (EV-11)


Ferrari 458 Italia New Wallpaper


Toyota Corolla XRS


To date, 180,000 new cars accept been awash as a aftereffect of the C4C program. So far, the program's absolute government amount amounts to aloof over $775 million. Late Wednesday, the Senate accomplished an acceding that would cascade an added $2 billion into C4C coffers. Additionally, consumers will now accept until September 1 to barter in their old cars and accept a agenda for amid $3,500 to $4,500. The new plan was abundantly pushed through by Senate Majority Leader Harry Reid, who acicular out that Democrats accept abundant votes to accept the new plan as able-bodied as adios any changes to it. Cheers to Matt and several others for the tip.
Modified Honda Civic Coupe 1995 Red
Specification :
CAR MAKE & CAR MODEL:
Modified Car Honda Civic Coupe 1995 Red
CAR COLOUR:
Red
0-60 | 8 | 1/4 Mile | |
Top speed | 135 | Power (BHP) | 160 |
Friday, December 17, 2010
2010 Wide Body Mustang by Fox
Fox Marketing can build this Mustang for anyone that is interested ASAP. They just need the 2010 Mustang and they are ready to start and will take 6 weeks to build one off!!
The front fender scoop (next to the headlights) with vent to cool the front brakes, and of course the rear will do the same for the rear brakes. This car will be 1ft wider than stock so you can really beat on the race track if you wish. Fox is designing the car with a custom iForged 20×14 inch 3 piece wheel with a Toyo 365 20 inch tire. Need to put the power to the ground right..haha? Fully street legal and will pass emissions with no issues. Look for this serious street car to pump out 750hp AMSOIL engine package and be one of a kind with a custom BASF Color, iForged Wheels, Toyo Tires, 15 inch SSBC Big Brakes, etc.
Skoda Octavia vRS Facelift (2009)
Skoda has released the first images of 2009 Skoda Octavia vRS facelift along with its details. Powered by 2.0 T FSI engine coupled with a six-speed manual twin-clutch DSG transmission, the 2009 Skoda Octavia vRS facelift may outputs 200bhp and offers a 37.7mpg fuel economy. However, a 2.0 TDI CR engine also available for the 2009 Skoda Octavia vRS facelift that offers 170bhp and 49.6mpg fuel economy.
Skoda Octavia vRS facelift (2009) is now available with 18″ Neptune alloy wheels and it comes with a redesigned rear lights, front grille, and headlamps so it can be fitted with xenon and an adaptive front lighting system.
Skoda Octavia vRS facelift (2009) also comes with LED lamps for daytime lighting and front fog lamps with optional cornering function.

Press Release
Following the launch of the new Octavia late last year, the vRS and Scout have been updated to bring them into line with the current range and family face of Skoda.
The sporty Octavia vRS has proved extremely popular since it was launched in 2000. More than 60,000 have been sold, 70 per cent of which were the estate version.

The facelifted vRS has a redesigned front grille featuring the vRS logo and bold headlamps, which for the first time can be fitted with xenon headlights combined with the adaptive front lighting system. The car has two more completely new features: front fog lamps with optional cornering function and LED lamps for daytime lighting. The rear lights have been redesigned to look more attractive and new 18” Neptune alloy wheels are available.
Other changes to the vRS include a new metallic paint, Anthracite, and a lowered (now 127mm) sports-tuned chassis.

The car is also lighter – the petrol version by 20kg and the diesel by 15kg. With reduced air resistance the maximum speed of the vRS is now higher and the car’s responsiveness and acceleration have also been improved.
The vRS is available with a choice of two engines, which both comply with the EU5 standard. The 2.0 T FSI 200bhp offers fuel consumption of 37.7mpg (combined cycle) and CO2 emissions of 175g/km. The 2.0 TDI CR 170bhp offers 49.6mpg (combined cycle) and emits 150g/km of CO2. Both engines are available with a six-speed manual twin-clutch DSG transmission.

Mercedes E Class W212 (2010)
Mercedes E Class W212 (2010) by Carlsson that will be premiered at the Tuning World Bodensee this year has been unveiled by Carlsson.
Mercedes E Class W212 (2010) by Carlsson will bring both performance and visual modifications to the new model, while featuring the intelligent lowering kit C-Tronic SUSPENSION that lowers the ride height by 43 millimeters.
Mercedes E Class W212 (2010) also has been designed on its aerodynamics kit by Rolf Schepp that will be included with a new rear apron with an integrated diffuser, a new rear spoiler, new front wings, side rails, four stainless steel end exhaust pipes.

http://carmodifcation.blogspot.com/
Press Release
The new E-class by Carlsson celebrates its world premiere at the Tuning World Bodensee in Friedrichshafen from April 30th until May 3rd 2009. With the new E-class, the automobile manufacturer has combined sportiness and elegance to a harmonic symbiosis.
In former times, thorough-blood race-horses where bred at Gut Wiesenhof in Merzig/Saarland – it is the Carlsson headquarter and production location for the new sportive Carlsson E-class. Carlsson transfers this history-laden origin to the new model of the upper medium-class.
The new aerodynamics kit which has been elaborately developed by head designer Rolf Schepp, immediately attracts the attention. The Carlsson Mercedes has an entirely newly designed front apron with vertically adjusted xenon-light LED daylight running lights and a stainless steel grid under the gracefully built radiator grill.

http://carmodifcation.blogspot.com/
The rearing Carlsson horse is an epitome for power and class
The rearing horse is placed on the sides of the completely re-engineered front wings: A Carlsson hallmark an expression of power and class. The side rails enhance the re-engineered dynamic design vocabulary at the sides. The rear apron attachment with the integrated diffuser which is framed by four stainless steel end pipes and the unobtrusive rear spoiler further perfect the sporty appearance.
The entire aerodynamics kit is made of polyurethane (PUR-RIM) which does not only guarantee a perfect fitting accuracy and highest stability, but also a very light weight.
During sporty tours, the driver of the new Carlsson E-class profits from the intelligent lowering kit C-Tronic® SUSPENSION, a state-of-the-art technology. It does not only lower the automobile by up to 43 millimetres, but also continuously adjusts the remaining jounce travel to the road situation. Therefore, the control module always finds the perfect combination between sporty and taut adjustment and optimal travelling comfort.
With an enormous self-confidence and strength of character, the wheel model 1/5 REVO harmonises with the new Carlsson automobile.

http://carmodifcation.blogspot.com/
The even double spokes of the unicoloured rims measuring up to 10.5×20 inches consist of a matt black and a matt-varnished gloss-turned silver strut each.
And the Carlsson R&D engineers consequently continue their work in the interior. Safe grip is provided by brushed aluminium pedal layers which can be obtained for either automatic or gear-shifted engines and by perfectly cut foot rests. In combination with the entirely newly designed foot mats with an integrated white-lit Carlsson logo, this renders a perfect ambience for the interior. Of course, also a tailor-made gearshift made of an ultrasuede-leather combination and door lock bolts made of turned aluminium are also available.
The automobile manufacturer Carlsson is approved by the German federal motor transport authority and provides performance enhancements for the models E 250 CDI BlueEFFICIENCY (40 hp extra performance) from June and for the E 350 CDI BlueEFFICIENCY (46 PS extra performance) from July on. Carlsson offers the compressor kit CM50K including an entire exhaust system with racing header, high-performance catalysts and stainless steel mufflers for the top model E 500 (55 hp extra performance).

http://carmodifcation.blogspot.com/
Perfect quality – always with a three-year warranty
Carlsson knows about the quality of its own products and therefore extends its own warranty. Since April 2009, Carlsson offers a three-year-warranty for all automobiles and products, regardless of whether a new or used car is concerned. Together with the Mercedes Benz Manufacturer Warranty, Carlsson offers a three-year safety for the entire vehicle. As it has been confirmed that all Carlsson products are equipped with OEM-quality parts and their safety was underlined by Mercedes, fitting Carlsson products does not lower the Mercedes Benz Manufacturer Warranty. Therefore, the Carlsson warranty perfectly amends the protection for the automobile.
Mercedes E Class W212 (2010) by Carlsson will bring both performance and visual modifications to the new model, while featuring the intelligent lowering kit C-Tronic SUSPENSION that lowers the ride height by 43 millimeters.
Mercedes E Class W212 (2010) also has been designed on its aerodynamics kit by Rolf Schepp that will be included with a new rear apron with an integrated diffuser, a new rear spoiler, new front wings, side rails, four stainless steel end exhaust pipes.

http://carmodifcation.blogspot.com/
Press Release
The new E-class by Carlsson celebrates its world premiere at the Tuning World Bodensee in Friedrichshafen from April 30th until May 3rd 2009. With the new E-class, the automobile manufacturer has combined sportiness and elegance to a harmonic symbiosis.
In former times, thorough-blood race-horses where bred at Gut Wiesenhof in Merzig/Saarland – it is the Carlsson headquarter and production location for the new sportive Carlsson E-class. Carlsson transfers this history-laden origin to the new model of the upper medium-class.
The new aerodynamics kit which has been elaborately developed by head designer Rolf Schepp, immediately attracts the attention. The Carlsson Mercedes has an entirely newly designed front apron with vertically adjusted xenon-light LED daylight running lights and a stainless steel grid under the gracefully built radiator grill.

http://carmodifcation.blogspot.com/
The rearing Carlsson horse is an epitome for power and class
The rearing horse is placed on the sides of the completely re-engineered front wings: A Carlsson hallmark an expression of power and class. The side rails enhance the re-engineered dynamic design vocabulary at the sides. The rear apron attachment with the integrated diffuser which is framed by four stainless steel end pipes and the unobtrusive rear spoiler further perfect the sporty appearance.
The entire aerodynamics kit is made of polyurethane (PUR-RIM) which does not only guarantee a perfect fitting accuracy and highest stability, but also a very light weight.
During sporty tours, the driver of the new Carlsson E-class profits from the intelligent lowering kit C-Tronic® SUSPENSION, a state-of-the-art technology. It does not only lower the automobile by up to 43 millimetres, but also continuously adjusts the remaining jounce travel to the road situation. Therefore, the control module always finds the perfect combination between sporty and taut adjustment and optimal travelling comfort.
With an enormous self-confidence and strength of character, the wheel model 1/5 REVO harmonises with the new Carlsson automobile.

http://carmodifcation.blogspot.com/
The even double spokes of the unicoloured rims measuring up to 10.5×20 inches consist of a matt black and a matt-varnished gloss-turned silver strut each.
And the Carlsson R&D engineers consequently continue their work in the interior. Safe grip is provided by brushed aluminium pedal layers which can be obtained for either automatic or gear-shifted engines and by perfectly cut foot rests. In combination with the entirely newly designed foot mats with an integrated white-lit Carlsson logo, this renders a perfect ambience for the interior. Of course, also a tailor-made gearshift made of an ultrasuede-leather combination and door lock bolts made of turned aluminium are also available.
The automobile manufacturer Carlsson is approved by the German federal motor transport authority and provides performance enhancements for the models E 250 CDI BlueEFFICIENCY (40 hp extra performance) from June and for the E 350 CDI BlueEFFICIENCY (46 PS extra performance) from July on. Carlsson offers the compressor kit CM50K including an entire exhaust system with racing header, high-performance catalysts and stainless steel mufflers for the top model E 500 (55 hp extra performance).

http://carmodifcation.blogspot.com/
Perfect quality – always with a three-year warranty
Carlsson knows about the quality of its own products and therefore extends its own warranty. Since April 2009, Carlsson offers a three-year-warranty for all automobiles and products, regardless of whether a new or used car is concerned. Together with the Mercedes Benz Manufacturer Warranty, Carlsson offers a three-year safety for the entire vehicle. As it has been confirmed that all Carlsson products are equipped with OEM-quality parts and their safety was underlined by Mercedes, fitting Carlsson products does not lower the Mercedes Benz Manufacturer Warranty. Therefore, the Carlsson warranty perfectly amends the protection for the automobile.
Nissan GT-R wing doors
Nissan GT-R wing doors has been launched by LSD - a tuner specialized in lambo doors manufacturing.
Nissan GT-R wing doors by LSD feature the new GRS (Guided Roller System) which offers better safety and more precise opening and closing of the door.
Nissan GT-R wing doors by LSD are three-dimensional adjustable and can befitted without any additional welding or repainting, while approved by the German TUV.

http://carmodifcation.blogspot.com/
Press Release
By mounting LSD wing door hinges, the legendary new Nissan GT-R becomes the absolute looker. The wing doors hinges are available with immediate effect for 1949 Euro.
The LSD wing door hinges for the Nissan GT-R feature the new GRS (Guided Roller System). It offers an adjustment possibility with the roller guidance. This results in more safety and more precise opening and closing of the door.
LSD door fittings come with a German TÜV certificate certifying that the LSD wing doors meet all safety standards.

http://carmodifcation.blogspot.com/
Compared to other retrofit sets for wing doors, the LSD fittings made in Germany are more impressive due to their absolutely sound engineering and the highest-possible standard of quality. In addition, a testing laboratory accredited by the German Kraftfahrtbundesamt (Federal motoring bureau) proved in a side-crash test, that the LSD-solution patented in Germany is as secure as a door assembled in the series production. This means: the occupants safety is guaranteed by the LSD door fittings in a side-crash complying with rule 96/27/EG. LSD makes a quick and easy installation possible, without any welding or repainting necessary. Another convincing feature is their perfect fit, thanks to the ability to make three-dimensional adjustments. The LSD door fittings are mounted directly at the points where the original doors were removed. With the added fittings, the otherwise unchanged original doors open first outward and then gently glide upward and stop. Adjustable buffers prevent the doors from being opened too wide or from falling downward or inward when open. A simple grip is all it takes to close the door.
On the one hand, the LSD solution allows you to open the door in a outward motion with an aperture angle of approx. 30°; on the other hand, it also allows you to swing the wing door upward, and all that without any great exertion. The LSD wing doors lend any car a sensational look and are the ideal solution for all fans of unusual tuning and show cars. The LSD door fittings are available from LSD or special dealers.
Nissan GT-R wing doors by LSD feature the new GRS (Guided Roller System) which offers better safety and more precise opening and closing of the door.
Nissan GT-R wing doors by LSD are three-dimensional adjustable and can befitted without any additional welding or repainting, while approved by the German TUV.

http://carmodifcation.blogspot.com/
Press Release
By mounting LSD wing door hinges, the legendary new Nissan GT-R becomes the absolute looker. The wing doors hinges are available with immediate effect for 1949 Euro.
The LSD wing door hinges for the Nissan GT-R feature the new GRS (Guided Roller System). It offers an adjustment possibility with the roller guidance. This results in more safety and more precise opening and closing of the door.
LSD door fittings come with a German TÜV certificate certifying that the LSD wing doors meet all safety standards.

http://carmodifcation.blogspot.com/
Compared to other retrofit sets for wing doors, the LSD fittings made in Germany are more impressive due to their absolutely sound engineering and the highest-possible standard of quality. In addition, a testing laboratory accredited by the German Kraftfahrtbundesamt (Federal motoring bureau) proved in a side-crash test, that the LSD-solution patented in Germany is as secure as a door assembled in the series production. This means: the occupants safety is guaranteed by the LSD door fittings in a side-crash complying with rule 96/27/EG. LSD makes a quick and easy installation possible, without any welding or repainting necessary. Another convincing feature is their perfect fit, thanks to the ability to make three-dimensional adjustments. The LSD door fittings are mounted directly at the points where the original doors were removed. With the added fittings, the otherwise unchanged original doors open first outward and then gently glide upward and stop. Adjustable buffers prevent the doors from being opened too wide or from falling downward or inward when open. A simple grip is all it takes to close the door.
On the one hand, the LSD solution allows you to open the door in a outward motion with an aperture angle of approx. 30°; on the other hand, it also allows you to swing the wing door upward, and all that without any great exertion. The LSD wing doors lend any car a sensational look and are the ideal solution for all fans of unusual tuning and show cars. The LSD door fittings are available from LSD or special dealers.
Audi R8 GT
Audi R8 GT limited production version details and images has been released by the German carmaker. Based on the V10 FSI version of the car, Audi R8 GT has received the ‘Superleggera’ treatment.
Powered by the 5.2-liter V10 FSI engine, Audi R8 GT may develops 412 kW (560 hp) and 540 Nm (398.28 lb-ft) of torque at 6,500 rpm. Audi R8 GT also has a re-mapped ECU that offers 26 kW and 10 Nm more than standard. With acceleration time 0 to 100 km/h in just 3.6 seconds, Audi R8 GT car may reach its top speed at 320 km/h.
Audi R8 GT only has 1,525 kilograms (3,362.05 lb) on weighs, as it has received various carbon fiber body parts that have reduced the weight of the car by 100 kg.
Audi R8 GT comes with lighter body parts that includes: carbon fiber rear hatch, front splitter and rear diffuser, fixed wing, a thinner windshield, a polycarbonate rear hatch window, and also sideblades.
Audi R8 GT price will starts at 193,000 EUR in Germany, while its price for the rest of the European market might start a little lower.
http://carmodifcation.blogspot.com/
Press Release
Now even more powerful, lighter and faster: Audi presents a limited-production version of it R8 high-performance sports car, the Audi R8 GT. The output of its 5.2-liter V10 has been increased to 412 kW (560 hp); vehicle weight has been reduced by roughly 100 kilograms (220.46 lb). The Audi R8 GT accelerates from zero to 100 km/h (62.14 mph) in 3.6 seconds and reaches a top speed of 320 km/h (198.84 mph).
The R8 high-performance sports car has been a winner from the very beginning. This applies to both the production models, winners of the “World Performance Car” Award in 2008 (R8) and in 2010 (R8 V10), and to the race car, the R8 LMS, which won 23 races in its first season and claimed three championships. The genes of the race version are now coming to the street – in the Audi R8 GT. The exclusive series is limited to 333 units. Each Audi R8 GT has a badge with its production number on the shift lever knob.
http://carmodifcation.blogspot.com/
Consistent use of lightweight construction: 100 kilograms (220.46 lb) trimmed
The production R8 5.2 FSI quattro is already a shining example of the Audi’s lightweight construction philosophy. Its aluminum Audi Space Frame (ASF) body weighs only 210 kilograms (462.97 lb). The aluminum body panels are joined to the frame of extruded profiles and cast nodes by means of positive and friction connections. The engine frame is made of ultra lightweight magnesium.
The ASF body is largely hand-built at the Neckarsulm plant in a complex manufacturing process. The extremely high strength of the body is the basis for the high-performance sports car’s precise handling, and it also offers good vibration comfort and first-rate crash safety.
Thanks to the ASF body, the production R8 5.2 FSI quattro weighs only 1,625 kilograms (3,582.51 lb) – with quattro permanent all-wheel drive and optional R tronic transmission. This made it all the more difficult for the engineers to once again achieve substantial weight savings. They took an elaborate approach involving every aspect of the vehicle, and in the end the scales came to rest at 1,525 kilograms (3,362.05 lb).
The windshield of the Audi R8 GT is made of thinner glass; the bulkhead between the passenger cell and engine compartment, as well as the window in the rear hatch are made of strong, lightweight polycarbonate. These three modifications saved nine kilograms (19.84 lb). The fixed rear wing is good for an additional 1.2 kilograms (2.65 lb); thinner sheet metal and additional cutouts shaved 2.6 kilograms (5.73 lb) from the aluminum hatch over the 100 liter (3.53 cu ft) luggage compartment at the front of the car.
The long rear hatch is made of carbon fiber-reinforced plastic (CFRP) – an advantage of 6.6 kilograms (14.55 lb). The rear bumper and the sideblades of this same material save an additional 5.2 and 1.5 kilograms (11.46 and 3.31 lb), respectively. With its minimal weight and extremely high strength, CFRP is the ideal material for a high-performance sports car, and Audi has broad-based expertise in its use.
The engineers also fought to shave every possible gram of weight from the technical components of R8. They shaved one kilogram (2.20 lb) from the power brake system, four kilograms (8.82 lb) from the aluminum caps of the brake discs and 9.4 kilograms (20.72 lb) from the battery. The engineers also found 2.3 kilograms (5.07 lb) in the air intake module and 2.8 kilograms (6.17 lb) in the insulation of the engine compartment.
The interior also harbored substantial weight-savings potential. The new, lightweight carpeting accounts for 7.9 kilograms (17.42 lb); the bucket seats with a chassis of glass-reinforced plastic (GRP) account for 31.5 kilograms (69.45 lb). Numerous additional detailed measures targeted the interior, the exterior and the technology, such as higher-grade, lighter steel for the exhaust system’s tailpipes.
http://carmodifcation.blogspot.com/
Even sharper and more effective: the design
The design of the Audi R8 GT is the expression of concentrated power – a beautiful, technical sculpture measuring 4.43 meters (14.53 ft) long, 1.93 meters (6.33 ft) wide and only 1.24 meters (4.04 ft) high. The exterior underwent numerous modifications that further sharpened the appearance. Many of them also reduce the weight and enhance the aerodynamics. The Audi R8 GT produces even more downforce when driven fast than the production model – without any increase in the Cd value (0.36) or frontal area (1.99 m2) (21.42 sq ft).
The frame of the single-frame grille, its struts and the slats in the air intakes are finished in matt titanium gray; the grille is painted matt black. The splitter under the bumper has a double lip and is made of carbon. Slender, curved flics at the corners of the nose increase the downforce on the front axle and are also made of a carbon fiber composite.
One highlight of the Audi R8 GT are the standard LED headlights, which use light-emitting diodes for all functions. They produce bright, homogeneous light, have a long service life and low energy consumption. The headlights also have an attractive and distinctive appearance. The daytime running lights each comprise 24 LEDs and appear as a continuous band. The reflectors are reminiscent of open mussel shells.
The defining element of the side view are the sideblades, which direct air to the engine and in the Audi R8 GT are also made of matte carbon. The same material is used for the reduced-size housing of the side mirrors, which are mounted on an aluminum base. The 19-inch wheels feature an exclusive five twin-spoke Y design in a titanium-look finish. The front fenders sport “GT” badges.
The modifications to the rear of the car are particularly apparent, beginning with the fixed wing of matte carbon. The ventilation louvers on both sides of the rear hatch and the CFRP bumper, which integrates the large, round tailpipes and vents for the wheel wells, have been redesigned. The larger diffuser is made of carbon fiber composite; the license plate bezel and the wide slats at the rear are in matte titanium gray. The tail lights, which also use LED technology, have dark housings with panes of clear glass.
Audi offers the Audi R8 GT in a choice of four body colors: Samoa Orange metallic, Suzuka Gray metallic, Ice Silver metallic and Phantom Black pearl effect.
http://carmodifcation.blogspot.com/
Breathtakingly powerful: the 412 kW (560 hp) 5.2 FSI
The modified V10, whose cylinder head covers are painted red, gives the Audi R8 GT breathtaking performance. The Audi R8 GT sprints from a standing start to highway speed in 3.6 seconds, and from zero to 200 km/h (124.27 mph) in 10.8 seconds. And the thrust does not let up until the top speed of 320 km/h (198.84 mph) is reached.
Changes to the engine electronics coaxed an additional 26 kW from the ten-cylinder, which now produces 412 kW (560 hp) from a displacement of 5,204 cc. The torque curve peaks at 540 Nm (398.28 lb-ft) at 6,500 rpm, 10 Nm (7.38 lb-ft) more than in the production version. The V10 has a specific power output of 79.2 kW (107.6 hp) per liter displacement. Its power-to-weight ratio is 3.70 kilograms (8.16 lb) per kW or 2.72 kilograms (6.00 lb) per hp. The engine redlines at 8,700 rpm.
The long-stroke engine (bore x stroke 84.5 x 92.8 millimeters [3.33 x 3.65 in]), which is hand-built at the factory in Györ, Hungary, features a crankcase made of a aluminum-silicon alloy that is both lightweight and very strong. A bedplate – a frame for the crankshaft bearing bridges – further enhances its rigidity. The complete engine weighs only 258 kilograms (568.79 lb). It is characterized by a cylinder angle of 90 degrees and dry-sump lubrication, which uses a highly efficient oil pump module. Both solutions lower the center of gravity and thus improve driving dynamics.
The crankshaft is designed as a common pin shaft. The connecting rods of the opposing pistons engage a common crankpin, resulting in alternating firing intervals of 54 and 90 degrees. This unique rhythm gives the V10 its fascinating sound – a grand, technical music very much like that in racing. Two flaps in the exhaust system modulate its volume and tone as a function of load and engine speed.
The normally aspirated engine consumes an average of 13.7 liters of fuel per 100 km (17.17 US mpg) – very good fuel economy given the tremendous power. The FSI gasoline direct injection system injects the fuel into the combustion chambers at up to 120 bar of pressure. The turbulent mixture cools the cylinder walls, enabling a compression ratio of 12.5:1. A variable intake manifold and the continuous adjustment of the chain-driven camshafts ensure that the combustion chambers are fully filled. Flaps in the intake ports facilitate the formation of the mixture by inducing a tumbling motion in the inflowing air.
http://carmodifcation.blogspot.com/
The drivetrain: uncompromising traction
Gear changes in the Audi R8 GT are handled by the R tronic sequential manual transmission. The electrohydraulic clutch and switching unit receive their commands electronically. It changes its six gears much faster than a skilled driver could – within a tenth of a second at high load and engine speed.
The electronic management system offers an automatic mode with the Sport and Normal characteristics, and two manual levels. It is controlled using the short gear selector lever on the center tunnel and two paddles on the steering wheel. Maximum thrust when starting is ensured by Launch Control – a program that manages full acceleration with high engine speed and minimum wheel slip when starting.
quattro permanent all-wheel drive is the ideal technology for a high-performance sports car. The central viscous coupling located at the front differential sends 15 percent of the power to the front axle and 85 percent to the rear axle during normal driving. This split harmonizes perfectly with the Audi R8 GT’s 43:57 percent weight distribution. The coupling sends as much as 30 percent of the power to the front wheels within milliseconds, if necessary. A mechanical locking differential at the rear axle further improves traction. It provides up to 25 percent lockup when accelerating and up to 40 percent on the overrun.
http://carmodifcation.blogspot.com/
Chassis even tauter and more precise
The Audi R8 GT high-performance sports car is a driving machine with breathtaking lateral acceleration and lightning-fast, nearly instantaneous reactions. Its engine is mid-mounted close to the vertical axis; its mass is almost negligible during fast direction changes. The Audi R8 GT is dynamic, precise and stable in almost every situation.
The chassis follows the classic racing design – double wishbones made of aluminum locate the wheels. The hydraulic, power-assisted rack-and-pinion steering has a direct 16.3:1 ratio and connects the driver closely and precisely with the road. A manually adjustable coilover suspension, which lowers the body by as much as 10 millimeters (0.39 in), is standard. Higher front and rear wheel camber rates make the handling a tick more agile than with the standard model.
The 19-inch forged wheels are 8.5 J x 19 up front and 11 J x 19 at the rear, and are shod with size 235/35 and 295/30 tires, respectively. Audi will mount 305/30 tires together with optional wheels on the rear axle upon request. Cup tires, which offer the ultimate in performance on dry roads, are available for racing enthusiasts.
Audi mounts internally ventilated, carbon fiber ceramic brake disks standard. They are extremely durable and abrasion-resistant as well as particularly lightweight. Together they weigh nine kilograms (19.84 lb) less than their steel counterparts of the same size. They measure 380 millimeters (14.96 in) in diameter up front and 356 millimeters (14.02 in) at the rear. The friction rings are bolted to the stainless steel caps via elastic elements. Red anodized aluminum brake calipers – with six pistons up front – are exclusive to the Audi R8 GT.
The ESP stabilization program has been specially tuned to the Audi R8 GT and can be switched into a Sport mode at the push of a button to allow spectacular, but safe, oversteer when accelerating out of a corner. The driver can deactivate the system entirely for a trip to the race track.
http://carmodifcation.blogspot.com/
Exclusive and dynamic: interior and equipment
At Audi, reducing weight means increasing performance and efficiency, but not sacrifice. The Audi R8 GT, which Audi sells in Germany for €193,000, comes with an automatic climate control system and power windows, a navigation system with MMI operating logic and a powerful sound system. A 465 watt, ten-channel Bang & Olufsen sound system, a CD changer and the Audi Music Interface are available as options. As always with Audi, the interior shows loving attention to detail. Rich materials spoil the occupants with a fine look and feel.
The ergonomic interior is adorned in sporty black and dark gray. The steering wheel, the headliner, the roof posts, the knee pad, the parking brake lever and the bucket seats are covered with Alcantara accented with contrasting stitching. A synthetic sharkskin-look material that feels slightly rough to the touch is applied to the bulkhead, the door liners, the instrument cowl and the dashboard. The “monoposto” – the arch in the cockpit – is made of matt carbon.
The instrument cluster features white dials with “Audi R8 GT” badges. The newly designed selector lever is made of CFRP and aluminum; the center tunnel and the door liners sport decorative inlays in the body color. The door sills feature trims of matt aluminum decorated with the “Audi R8 GT” logo.
A number of exclusive features are available as options for the Audi R8 GT. Exterior options include two alternative wheels, a body-color front splitter and a CFRP engine compartment lining. Carbon elements on the doors, the tunnel, in the cockpit and on the instrument panel are available as interior options. Others include a multifunction leather steering wheel, seat belts in red, orange or gray, floor mats with the “Audi R8 GT” logo and CFRP door sill trims illuminated in red. If desired, Audi will fit seats with carbon frames, which are somewhat lighter than the CFRP shells. The Alcantara seat covers are optionally available with an embroidered “Audi R8 GT” logo.
A race package is available for racing enthusiasts. It includes a bolt-in roll bar in red or black, which has both road and type approval, as well as road-approved four-point belts in red or black, a fire extinguisher and a kill switch for the battery. An optional front bar module for motorsports evens includes a rotary lock for the four-point seatbelt and turns the roll bar into a full cage. Buyers looking for more comfort and convenience can choose cell phone preparation with an innovative belt microphone. Audi also offers a full leather package, control elements in leather with contrasting stitching and a cruise control system as options. The parking aid is included with the standard equipment.
Powered by the 5.2-liter V10 FSI engine, Audi R8 GT may develops 412 kW (560 hp) and 540 Nm (398.28 lb-ft) of torque at 6,500 rpm. Audi R8 GT also has a re-mapped ECU that offers 26 kW and 10 Nm more than standard. With acceleration time 0 to 100 km/h in just 3.6 seconds, Audi R8 GT car may reach its top speed at 320 km/h.
Audi R8 GT only has 1,525 kilograms (3,362.05 lb) on weighs, as it has received various carbon fiber body parts that have reduced the weight of the car by 100 kg.
Audi R8 GT comes with lighter body parts that includes: carbon fiber rear hatch, front splitter and rear diffuser, fixed wing, a thinner windshield, a polycarbonate rear hatch window, and also sideblades.
Audi R8 GT price will starts at 193,000 EUR in Germany, while its price for the rest of the European market might start a little lower.

Press Release
Now even more powerful, lighter and faster: Audi presents a limited-production version of it R8 high-performance sports car, the Audi R8 GT. The output of its 5.2-liter V10 has been increased to 412 kW (560 hp); vehicle weight has been reduced by roughly 100 kilograms (220.46 lb). The Audi R8 GT accelerates from zero to 100 km/h (62.14 mph) in 3.6 seconds and reaches a top speed of 320 km/h (198.84 mph).
The R8 high-performance sports car has been a winner from the very beginning. This applies to both the production models, winners of the “World Performance Car” Award in 2008 (R8) and in 2010 (R8 V10), and to the race car, the R8 LMS, which won 23 races in its first season and claimed three championships. The genes of the race version are now coming to the street – in the Audi R8 GT. The exclusive series is limited to 333 units. Each Audi R8 GT has a badge with its production number on the shift lever knob.

Consistent use of lightweight construction: 100 kilograms (220.46 lb) trimmed
The production R8 5.2 FSI quattro is already a shining example of the Audi’s lightweight construction philosophy. Its aluminum Audi Space Frame (ASF) body weighs only 210 kilograms (462.97 lb). The aluminum body panels are joined to the frame of extruded profiles and cast nodes by means of positive and friction connections. The engine frame is made of ultra lightweight magnesium.
The ASF body is largely hand-built at the Neckarsulm plant in a complex manufacturing process. The extremely high strength of the body is the basis for the high-performance sports car’s precise handling, and it also offers good vibration comfort and first-rate crash safety.
Thanks to the ASF body, the production R8 5.2 FSI quattro weighs only 1,625 kilograms (3,582.51 lb) – with quattro permanent all-wheel drive and optional R tronic transmission. This made it all the more difficult for the engineers to once again achieve substantial weight savings. They took an elaborate approach involving every aspect of the vehicle, and in the end the scales came to rest at 1,525 kilograms (3,362.05 lb).
The windshield of the Audi R8 GT is made of thinner glass; the bulkhead between the passenger cell and engine compartment, as well as the window in the rear hatch are made of strong, lightweight polycarbonate. These three modifications saved nine kilograms (19.84 lb). The fixed rear wing is good for an additional 1.2 kilograms (2.65 lb); thinner sheet metal and additional cutouts shaved 2.6 kilograms (5.73 lb) from the aluminum hatch over the 100 liter (3.53 cu ft) luggage compartment at the front of the car.
The long rear hatch is made of carbon fiber-reinforced plastic (CFRP) – an advantage of 6.6 kilograms (14.55 lb). The rear bumper and the sideblades of this same material save an additional 5.2 and 1.5 kilograms (11.46 and 3.31 lb), respectively. With its minimal weight and extremely high strength, CFRP is the ideal material for a high-performance sports car, and Audi has broad-based expertise in its use.
The engineers also fought to shave every possible gram of weight from the technical components of R8. They shaved one kilogram (2.20 lb) from the power brake system, four kilograms (8.82 lb) from the aluminum caps of the brake discs and 9.4 kilograms (20.72 lb) from the battery. The engineers also found 2.3 kilograms (5.07 lb) in the air intake module and 2.8 kilograms (6.17 lb) in the insulation of the engine compartment.
The interior also harbored substantial weight-savings potential. The new, lightweight carpeting accounts for 7.9 kilograms (17.42 lb); the bucket seats with a chassis of glass-reinforced plastic (GRP) account for 31.5 kilograms (69.45 lb). Numerous additional detailed measures targeted the interior, the exterior and the technology, such as higher-grade, lighter steel for the exhaust system’s tailpipes.

Even sharper and more effective: the design
The design of the Audi R8 GT is the expression of concentrated power – a beautiful, technical sculpture measuring 4.43 meters (14.53 ft) long, 1.93 meters (6.33 ft) wide and only 1.24 meters (4.04 ft) high. The exterior underwent numerous modifications that further sharpened the appearance. Many of them also reduce the weight and enhance the aerodynamics. The Audi R8 GT produces even more downforce when driven fast than the production model – without any increase in the Cd value (0.36) or frontal area (1.99 m2) (21.42 sq ft).
The frame of the single-frame grille, its struts and the slats in the air intakes are finished in matt titanium gray; the grille is painted matt black. The splitter under the bumper has a double lip and is made of carbon. Slender, curved flics at the corners of the nose increase the downforce on the front axle and are also made of a carbon fiber composite.
One highlight of the Audi R8 GT are the standard LED headlights, which use light-emitting diodes for all functions. They produce bright, homogeneous light, have a long service life and low energy consumption. The headlights also have an attractive and distinctive appearance. The daytime running lights each comprise 24 LEDs and appear as a continuous band. The reflectors are reminiscent of open mussel shells.
The defining element of the side view are the sideblades, which direct air to the engine and in the Audi R8 GT are also made of matte carbon. The same material is used for the reduced-size housing of the side mirrors, which are mounted on an aluminum base. The 19-inch wheels feature an exclusive five twin-spoke Y design in a titanium-look finish. The front fenders sport “GT” badges.
The modifications to the rear of the car are particularly apparent, beginning with the fixed wing of matte carbon. The ventilation louvers on both sides of the rear hatch and the CFRP bumper, which integrates the large, round tailpipes and vents for the wheel wells, have been redesigned. The larger diffuser is made of carbon fiber composite; the license plate bezel and the wide slats at the rear are in matte titanium gray. The tail lights, which also use LED technology, have dark housings with panes of clear glass.
Audi offers the Audi R8 GT in a choice of four body colors: Samoa Orange metallic, Suzuka Gray metallic, Ice Silver metallic and Phantom Black pearl effect.

Breathtakingly powerful: the 412 kW (560 hp) 5.2 FSI
The modified V10, whose cylinder head covers are painted red, gives the Audi R8 GT breathtaking performance. The Audi R8 GT sprints from a standing start to highway speed in 3.6 seconds, and from zero to 200 km/h (124.27 mph) in 10.8 seconds. And the thrust does not let up until the top speed of 320 km/h (198.84 mph) is reached.
Changes to the engine electronics coaxed an additional 26 kW from the ten-cylinder, which now produces 412 kW (560 hp) from a displacement of 5,204 cc. The torque curve peaks at 540 Nm (398.28 lb-ft) at 6,500 rpm, 10 Nm (7.38 lb-ft) more than in the production version. The V10 has a specific power output of 79.2 kW (107.6 hp) per liter displacement. Its power-to-weight ratio is 3.70 kilograms (8.16 lb) per kW or 2.72 kilograms (6.00 lb) per hp. The engine redlines at 8,700 rpm.
The long-stroke engine (bore x stroke 84.5 x 92.8 millimeters [3.33 x 3.65 in]), which is hand-built at the factory in Györ, Hungary, features a crankcase made of a aluminum-silicon alloy that is both lightweight and very strong. A bedplate – a frame for the crankshaft bearing bridges – further enhances its rigidity. The complete engine weighs only 258 kilograms (568.79 lb). It is characterized by a cylinder angle of 90 degrees and dry-sump lubrication, which uses a highly efficient oil pump module. Both solutions lower the center of gravity and thus improve driving dynamics.
The crankshaft is designed as a common pin shaft. The connecting rods of the opposing pistons engage a common crankpin, resulting in alternating firing intervals of 54 and 90 degrees. This unique rhythm gives the V10 its fascinating sound – a grand, technical music very much like that in racing. Two flaps in the exhaust system modulate its volume and tone as a function of load and engine speed.
The normally aspirated engine consumes an average of 13.7 liters of fuel per 100 km (17.17 US mpg) – very good fuel economy given the tremendous power. The FSI gasoline direct injection system injects the fuel into the combustion chambers at up to 120 bar of pressure. The turbulent mixture cools the cylinder walls, enabling a compression ratio of 12.5:1. A variable intake manifold and the continuous adjustment of the chain-driven camshafts ensure that the combustion chambers are fully filled. Flaps in the intake ports facilitate the formation of the mixture by inducing a tumbling motion in the inflowing air.

The drivetrain: uncompromising traction
Gear changes in the Audi R8 GT are handled by the R tronic sequential manual transmission. The electrohydraulic clutch and switching unit receive their commands electronically. It changes its six gears much faster than a skilled driver could – within a tenth of a second at high load and engine speed.
The electronic management system offers an automatic mode with the Sport and Normal characteristics, and two manual levels. It is controlled using the short gear selector lever on the center tunnel and two paddles on the steering wheel. Maximum thrust when starting is ensured by Launch Control – a program that manages full acceleration with high engine speed and minimum wheel slip when starting.
quattro permanent all-wheel drive is the ideal technology for a high-performance sports car. The central viscous coupling located at the front differential sends 15 percent of the power to the front axle and 85 percent to the rear axle during normal driving. This split harmonizes perfectly with the Audi R8 GT’s 43:57 percent weight distribution. The coupling sends as much as 30 percent of the power to the front wheels within milliseconds, if necessary. A mechanical locking differential at the rear axle further improves traction. It provides up to 25 percent lockup when accelerating and up to 40 percent on the overrun.

Chassis even tauter and more precise
The Audi R8 GT high-performance sports car is a driving machine with breathtaking lateral acceleration and lightning-fast, nearly instantaneous reactions. Its engine is mid-mounted close to the vertical axis; its mass is almost negligible during fast direction changes. The Audi R8 GT is dynamic, precise and stable in almost every situation.
The chassis follows the classic racing design – double wishbones made of aluminum locate the wheels. The hydraulic, power-assisted rack-and-pinion steering has a direct 16.3:1 ratio and connects the driver closely and precisely with the road. A manually adjustable coilover suspension, which lowers the body by as much as 10 millimeters (0.39 in), is standard. Higher front and rear wheel camber rates make the handling a tick more agile than with the standard model.
The 19-inch forged wheels are 8.5 J x 19 up front and 11 J x 19 at the rear, and are shod with size 235/35 and 295/30 tires, respectively. Audi will mount 305/30 tires together with optional wheels on the rear axle upon request. Cup tires, which offer the ultimate in performance on dry roads, are available for racing enthusiasts.
Audi mounts internally ventilated, carbon fiber ceramic brake disks standard. They are extremely durable and abrasion-resistant as well as particularly lightweight. Together they weigh nine kilograms (19.84 lb) less than their steel counterparts of the same size. They measure 380 millimeters (14.96 in) in diameter up front and 356 millimeters (14.02 in) at the rear. The friction rings are bolted to the stainless steel caps via elastic elements. Red anodized aluminum brake calipers – with six pistons up front – are exclusive to the Audi R8 GT.
The ESP stabilization program has been specially tuned to the Audi R8 GT and can be switched into a Sport mode at the push of a button to allow spectacular, but safe, oversteer when accelerating out of a corner. The driver can deactivate the system entirely for a trip to the race track.

Exclusive and dynamic: interior and equipment
At Audi, reducing weight means increasing performance and efficiency, but not sacrifice. The Audi R8 GT, which Audi sells in Germany for €193,000, comes with an automatic climate control system and power windows, a navigation system with MMI operating logic and a powerful sound system. A 465 watt, ten-channel Bang & Olufsen sound system, a CD changer and the Audi Music Interface are available as options. As always with Audi, the interior shows loving attention to detail. Rich materials spoil the occupants with a fine look and feel.
The ergonomic interior is adorned in sporty black and dark gray. The steering wheel, the headliner, the roof posts, the knee pad, the parking brake lever and the bucket seats are covered with Alcantara accented with contrasting stitching. A synthetic sharkskin-look material that feels slightly rough to the touch is applied to the bulkhead, the door liners, the instrument cowl and the dashboard. The “monoposto” – the arch in the cockpit – is made of matt carbon.
The instrument cluster features white dials with “Audi R8 GT” badges. The newly designed selector lever is made of CFRP and aluminum; the center tunnel and the door liners sport decorative inlays in the body color. The door sills feature trims of matt aluminum decorated with the “Audi R8 GT” logo.
A number of exclusive features are available as options for the Audi R8 GT. Exterior options include two alternative wheels, a body-color front splitter and a CFRP engine compartment lining. Carbon elements on the doors, the tunnel, in the cockpit and on the instrument panel are available as interior options. Others include a multifunction leather steering wheel, seat belts in red, orange or gray, floor mats with the “Audi R8 GT” logo and CFRP door sill trims illuminated in red. If desired, Audi will fit seats with carbon frames, which are somewhat lighter than the CFRP shells. The Alcantara seat covers are optionally available with an embroidered “Audi R8 GT” logo.
A race package is available for racing enthusiasts. It includes a bolt-in roll bar in red or black, which has both road and type approval, as well as road-approved four-point belts in red or black, a fire extinguisher and a kill switch for the battery. An optional front bar module for motorsports evens includes a rotary lock for the four-point seatbelt and turns the roll bar into a full cage. Buyers looking for more comfort and convenience can choose cell phone preparation with an innovative belt microphone. Audi also offers a full leather package, control elements in leather with contrasting stitching and a cruise control system as options. The parking aid is included with the standard equipment.
HAMANN Volcano Mercedes SLR McLaren
HAMANN has released the details and photos of its latest project - Volcano Mercedes SLR McLaren’s. Featuring new side skirt attachments and sheathings, HAMANN Volcano Mercedes SLR McLaren also comes with a rear diffuser, a new bonnet, front and rear wing extensions.
Powered by a 5.4 liters V8 engine, this superb sports cars may develops 626 hp and 780 Nm of torque.
HAMANN Volcano Mercedes SLR McLaren manages to get from 0 to 100 km/h in 3.6 seconds and reach its top speed up to 348 km/h with this modified engine.
With these results, HAMANN Volcano Mercedes SLR McLaren is 11 km/h faster than the SLR 722 special edition, and 14 km/h faster than the standard version.
Unfortunately, HAMANN has not released the information about Volcano Mercedes SLR McLaren price.
Press Release
The serial Mercedes-Benz SLR is already one of the most impressive cars on our roads – but compared to the HAMANN VOLCANO it still looks rather harmless. Once again, HAMANN-Motorsport proves its cutting edge when it comes to refining superb sports cars. From a lift-reducing body design to a powerful performance enhancement to a lavishly styled interior, HAMANN focuses on all components of this luxury car and makes the automobile dreams of its exclusive clientele come true.
The total makeover of the Laupheim-based refiner is made of extremely light full carbon and consists of front- and rear wing extensions and also new side skirt attachments and sheathings. The front view of the Volcano is optically perfected with a newly designed bonnet which enhances the overall impression by its integrated hood scoop. But also for the rear, the refining technicians implemented new ideas giving the SLR appearance its finishing touch. Under the boot lid cover, HAMANN placed a strong diffuser which improves the car’s output in combination with the large rear wing. At the front axle, a newly developed front spoiler renders the necessary contact pressure. If desired, an especially developed overall paint for the VOLCANO in either aluminum/chrome or white/matt completes the striking appearance of this bolide.
The 21-inch rims named EDITION RACE with tires measuring 255/30ZR21 at the front and 345/25ZR21 at the back render an optimal road grip. The design of the extraordinary light forged wheel thereby combines vitality and elegance and also perfectly fills out the wheel houses.
The HAMANN makeover is not only sportive, but also has a lot to offer under the bonnet. The HAMANN motor technicians get the most out of the Mercedes Benz V8-aggregate (5.4 liters, 626 hp, 780 Nm): 700 hp / 515 kW and a maximum torque of 830 Nm at 3,300 crankshaft revolutions per minute. The therefore necessary modifications include a newly programmed control unit, especially developed high performance exhaust manifolds and an amended belt pulley combination for the serial compressors.
In order to facilitate the increased motor performance, HAMANN adds a second water pump and adjusts the gearbox electronics. Invigorated in this way and with the adequate sound from the six end pipes of the sport exhaust system, the VULCANO accelerates from naught to a hundred in only 3.6 seconds. With a maximum speed of 348 km/h, the serial model.
The HAMANN product even beats the factory-provided performance-enhanced special series SLR 722 by impressive 11 km/h.
A skillfully refined interior is waiting for the VOLCANO-pilot and also the exterior does not rank behind. The overall makeover contains pedals and foot rests in aluminum as well as noble door sill protectors and headrests with embossed embroidered HAMANN-Logos. They can also be found on the exclusive floor mats.
The overall makeover can be enhanced with a HAMANN interior set containing custom-made carbon parts for the dashboard and center console. If desired, also the roof interior, all pillars, the cockpit including the steering wheel and the sun visors can hereby be adjusted in terms of color. Therefore, HAMANN solely uses the high-quality material Alcantara.
Wednesday, December 15, 2010
This car has seen ice racing, road racing, and auto-x.
Subtle aggressiveness.
I've always been a fan of a slightly understated, factory look; one that often has people asking me, "did the car come with that?"
I can't say why exactly, but that's what I dig. I'm a perfectionist, and I like when modifications integrate so seamlessly that you're not sure if it's a modification after all, or if its original equipment. Its not going to win many points at car shows (or NASIOC contests, ahem), but the way this car is put together is a reflection of myself and my personality, and I’m very happy with it. What you see here is a real car that gets driven... hard.
I've owned my WRX since Dec. 2002 (any other cars in the contest with over 75k miles on them?) and everything I know about cars has been learned on this car. I have always done all of my own work on the car, which is something I'm very proud of.. I started by learning how to change my oil and install a manual boost controller, and as you'll read, things have progressed quite a bit over the years.
My WRX has gone through many transformations, each improving on the last. As time passes I learn more, and I constantly raise the bar for myself. The state of my WRX as it sits is a prime example of where my abilities and personal expectations lie currently.
As you will notice, it's a [beautiful] bugeye. But it has Brembos all around? And a crinkle red intake manifold? Hmmm… that's a little different, whats going on here?
Things really got stepped up this past summer, when I spent two very long, amazing, frustrating, memorable, terrible, incredible weeks performing a complete 2007 STi transplant with the help of two of my very talented friends. The swap was completed from head to toe including engine, wiring, ECU, transmission, drivetrain, and more. We combined all of our knowledge and abilities together to essentially rebuild the car from the bare shell, and it turned out great. The engine turned over without hesitation or CEL on the first try, and we were off… I’ve since tried to maximize the potential of the engine including a polished and ceramic coated 3”/8cm FP Green turbo, APS FMIC, Perrin headers, EWG, Aquamist meth/water injection, and more…
Well rounded performance is the name of the game for me, and its what I've aimed to accomplish here. My priorities involve going fast--in the twisties and in a straight line--and I would never compromise my ability to drive the piss out of my car and enjoy it to the fullest on a regular basis, even if it means missing out on some mad JDM show points.
This car has seen ice racing, road racing, and auto-x. Its gotten me up to the mountains a hundred times and across the country a few. I'm already planning a track day in the spring and hope to see what she can do on the drag strip as well. What can I say, I love driving my car.



Ford Mustang generation
The birth of the Ford Mustang also saw the birth of the phrase "pony car", which is a term used to describe an American car that is sporty and affordable explained. Most horses are represented by, their small sizes cheap, compact and more powerful engine.
In the late 1950s, Ford saw sales decline in two-seat Thunderbird and in 1958 introduced, a new version of a larger 4-seat introduced in 1958 was very successful.
In the late 1950s, Ford saw sales decline in two-seat Thunderbird and in 1958 introduced, a new version of a larger 4-seat introduced in 1958 was very successful.
![]() |
http://carmodifcation.blogspot.com/ |
All car commercial success, but a number of top auto executives, including Lee Iacocca Ford believes there is a larger market that they could catch. They saw a niche market to buy a car that more young with disposable income looking for an affordable car to buy with a more sporty image.
Ford Mustang is a car that all other manufacturers want to mimic the new term "pony car" was adopted to lead. The term was first used by Dennis Shattuck, the editor of Car Life magazine around that time and created a sound based on the Ford Mustang ride.
First Generation
The first generation of Mustang has been made under the strict supervision of Lee Iacocca and Ford's chief engineer Donald N. Frey and take 18 months. The original prototype saw a car with a mid-mounted V4 engine and only 2 seats but this was abandoned for the design of 2 4-seater in February due to low sales of the Ford Thunderbird. February 2 design is believed to have been selected because of the success of cars like the Jaguar E-Type.
Design of the new agency created by Joe Oros that the design win in a match that produced by Iacocca.
"I told the team that the car I want to attract women, but I want to desire men, I want the front end such as Ferrari, motif centered on the front of heavy Something that looks like a Maserati, -. but, please, not a trident and I want to intake air on the side to cool the rear brakes, I say sporty as possible and it seems related to the European design "-.. - Oros
In order to maintain a minimum construction cost of a car based on parts of the car is production, such as Ford Falcon and Ford Fairline.
Second Generation
The second generation of the Mustang driven by the energy crisis in 1973 that cars were a big thirst for gasoline is not preferred because of rising fuel costs.
New, smaller Mustang II was released in 1973 and Ford is aiming to compete with small Japanese imports like the Toyota Celica. However, the last car was much heavier than their beginning to hurt performance.
Third Generation
In 1979 the third generation of the Mustang was introduced, highly dependent on the Japanese market for design. The car was designed more to accommodate four passengers, baggage volumes improved and extended the engine room for easy maintenance.
Fourth Generation
In 1994 the third generation Mustang suffered major Restyling for the signal from the original 1964 design for the first time since the 1973 version of the hatchback is no longer available.
The original engine was 3.8 OHV V6 rated 145 horsepower, but over the years, this is an upgrade to a 4.6L V8 producing 225 hp big in 1998.
Tuesday, December 14, 2010
2010 Jaguar Cars XJ75 Platinum Concept Car Luxury Sports
http://carmodifcation.blogspot.com/
2010 Jaguar Cars XJ75 Platinum Concept Car Luxury Sports Salon
The XJ75 Platinum Concept Car is the company's first demonstration of the design customisation potential of the striking new XJ luxury salon, emphasising the Jaguar's dramatic interior and exterior styling themes. "The XJ Luxury Sports Saloon is thoroughly modern, and captures the innovative and daring character that our founder Sir William Lyons built into every Jaguar. And the design team clearly had some fun making their first one-of-a-kind XJ design concept car in that spirit."
Performance on the XJ75 Platinum Concept is derived from its 5.0-litre Supercharged direct-injection V8 with 470 horsepower and 424 lb.-ft of torque. Entertainment is provided by a 1,200-watt Bowers & Wilkins surround sound system with 20 speakers powered through 15 channels and state-of-the-art sound processing technology.
The XJ75 Luxury Sports Saloon Platinum Concept centre console houses a bespoke clock developed and designed in partnership with the Bremont Watch Company.
An independent British company, Bremont creates beautifully engineered and designed mechanical watches hand assembled in Switzerland.
An independent British company, Bremont creates beautifully engineered and designed mechanical watches hand assembled in Switzerland.
Dominated by striking white and black contrast precious metals platinum theme suggests, the Jaguar XJ75 Platinum Concept is a high-performance 470-hp supercharged engine 2011 Jaguar XJL with new ground-hugging front, rear and rocker panel is fitted.
Subscribe to:
Posts (Atom)